Tenor AS Series - Analog VoIP MultiPath Switches

 

AS Series

 

The Tenor AS range gives businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP).

With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either PBX or phone, and the public switched telephone network. From this position, the Tenor employs its patent-pending SelectNet™ technology to monitor calls for jitter, packet loss, and latency, and can transparently switch mid-call to the existing PSTN voice network whenever conditions demand. New generation Tenor gateways support SIP or H.323 protocols, and NAT AccessTM solution ensures effective traversal through existing firewalls.


Product Description

Tenor ASM200 VoIP MultiPath Switch
Two channel VoIP switch with two analog FXS ports and two analog FXO ports, and one 10/100 Ethernet port. Includes the following features: MultiPath architecture, SelectNet QoS based switching, SIP User agent, built-in H.323 mini-gatekeeper (supports up to 4 Tenor switches). Supports up to two simultaneous voice calls over the IP network.

Tenor ASG200 VoIP MultiPath Switch
Two channel VoIP switch with two analog FXS ports, and one 10/100 Ethernet port. Can be connected to 2 analogue handsets or devices as needed. Includes the following features: MultiPath architecture, SIP user agent, built-in H.323 mini-gatekeeper (supports up to 4 Tenor switches). Supports up to two simultaneous voice calls over the IP network.

Tenor ASM400 VoIP MultiPath Switch
Four channel VoIP switch with four analog FXS ports and four analog FXO ports, and one 10/100 Ethernet port. Includes the following features: MultiPath architecture, SelectNet QoS based switching, SIP user agent, built-in H.323 mini-gatekeeper (supports up to 4 Tenor switches). Supports up to four simultaneous voice calls over the IP network.

Tenor ASG400 VoIP MultiPath Switch
Four channel VoIP switch with four analog FXS ports, and one 10/100 Ethernet port. Can be connected to 4 analogue handsets or devices as needed. Includes the following features: MultiPath architecture, SIP user agent, built-in H.323 mini-gatekeeper (supports up to 4 Tenor switches). Supports up to four simultaneous voice calls over the IP network.



Options

PS-4AS
Upgrades AS series Tenor gateways to employ PacketSaver TM technology, reducing bandwidth needed between Tenor units by up to half. For expensive bandwidth solutions this upgrade will ensure minimal data traffic. Commonly employed with satellite links and busy gateways.

Configuration, Installation and Support
Comms Connect can provide full configuration and install of Tenor Gateways as needed. Support is available during business hours or 24 hours.